Installing A Headlight Visor For Road

Posted on by

Remove existing front wheel assembly. Save axle, axle nut, brake disc, and wheel spacers for kit installation. Refer to FRONT WHEEL in service manual. For FLSTC and FLSTN Models: Discard moon-style hub cap. -J04065 1 of 8 For FXSTD Models: Discard the tapered r ight side wheel spacer.

33-0813 Outer Headlamp Frenched Trim Ring with Visor. 7 inch Headlight Visor - Install Video. My New Light Visors on my Road King Classic. Mar 19, 2011 installing visor style trim rings. There isn't going to be any problems installing the new visor. I installed the ordinary trim rings on the headlight. I bought a head light visor for my 2014 street glide. The dealer and others didn't know how to install it. I figured it out on my own with a few washers. Find great deals on eBay for road king headlight visor and road king visor. Shop with confidence.

Do not re-use brake disc/rotor screws. Re-using these screws can result in torque loss and damage to brake components. (00319c) NOTE • For Kits 43573-08, 43575-08, 43703-08, 43978-07, 43771- 07, 43609-07, 44323-07, 44282-07, 44322-07, 43975-07, 43602-07 and 43773-07 install short valve stem (43157- 83A) included in the installation kit.

• For Kits 40943-09, 40966-09 and 40996-09 install long valve stem (43206-01) included in the installation kit. See Figure 2. Install valve stem assembly (L, M or N) on wheel. Free Software Program Kasir Cafe here.

Cap Visor Headlight

Refer to TIRES in service manual. Assemble wheel installation kit components and brake disc(s) to wheel, using the appropriate service parts table. Filme Online Corridas Clandestinas Dublado more. Refer to FRONT WHEEL in Service Manual.

NOTES Install the primary bearing first using appropriate service manual and WHEEL BEARING REMOVER/INSTALLER. For Kits 43573-08, 43575-08, 43703-08, 43978-07, 43771-07, 43609-07, 40943-09, 40966-09 and 40996-09: • The left side of the wheel has a machined groove (item 5, Figure 2) in the hub face and/or DOT markings to identify it as the brake disc and primary bearing side.

Installing A Headlight Visor For Road

• Install the wheel so that the valve stem is on the right side of the motorcycle. For Kits 44323-07, 44322-07 and 44282-07: • Install the wheel so that the hub markings are on the left side of the motorcycle. The left side of the wheel has a machined groove (item 5, Figure 2) in the hub face and hub markings to identify it as the primary bearing side. • These kits include one or two hub plates (43985-00) to install between the brake disc and the wheel and a chrome hub cap (43986-00) to install on the wheel opposite the brake disc side.